Flash Lamp Systems

Flash Lamp SystemsAt Rapp OptoElectronic we offer a wide range of flash lamp systems featuring:

- Pulse length:	1 µs .... 10 ms
- Wavelength range:	190 .... 2000nm
- Repetition rate:	> 500 Hz
- Pulse energy:	> 5 kJ
- Average power:	> 5 kW

Our systems comprise all electrical, optical and mechanical components. We use high efficiency linear or point source flash bulbs. Internal and electrically isolated external trigger possibilities are standard.

DLR-EP1

-Flash lamp with 3 flashbulbs and fibre optic coupling.
-Controllable over Ethernet
-Pulse energy up to 3J

JML-C1

-Separate lamp housing with quartz optics, pulses from 0.5ms - 1 ms, up to 220J/pulse and moderate repetition rate

JML-C1E

Separate lamp housing with ellipsoidal mirror optics, pulses from 0.5 - 1 ms, up to 220J/pulse

JML-C2

fibre optically coupled, pulses from 0.5 - 1 ms, up to 220J/pulse, moderate repetition rate

FM-1

directly mounted on microscopes, pulse length < 10 µs, budget saving

DLR-D40

System with 4 optical ports

MP-10

Fibre optically coupled system, giant pulse followed by low energy pulses up to 70 Hz

SP-20

fibre optically coupled, pulses down to 2µs

DPS-2

-Double pulse strobe with fibre optic coupling
-Trigger input from video

DP-10

Double pulse strobe with 2 giant pulses (each up to 200J)

FHS-1

-Flash Heating System
-Up to 7kJ per pulse

NGW-10

-High power flash system
-Up to 2.5kW, 100Hz